Welcome to the official website of Shandong mountain heavy machinery Co., ltd.!

HOME » Enterprise announcement

Inspection and maintenance of loader before operation

Date:2017-06-19 14:41:25 Clicks:

Before handling the loader, check that the rod and pin on the machine are fixed in the storage position. The loader cannot turn if it is found that the machine frame is locked. When adding fuel to the loader, be sure to stop the engine. After adding oil, tighten the fuel cap. If oil spills are found, they must be repaired in time and wipe off all the dirty oil.

Loader is widely used in engineering and mining industry, because of its small size and flexible operation, it has been loved by a large number of users. But frequent, bad, and violent use results in a significant reduction in the life of a small loader, which often leaves it out prematurely. In order to maintain the normal operation of the loader, prolong the service life, must carry out the system of loader parts, careful inspection, adjustment and cleaning, in order to create the normal operation of the loader must be in good working condition, all kinds of fault prevention loader early wear and give full play to the performance of loaders. Therefore, in the use of loaders before and during the process, we must conscientiously do all the maintenance work.