Welcome to the official website of Shandong mountain heavy machinery Co., ltd.!

HOME » Enterprise announcement

Working device of loader

Date:2017-06-19 14:41:16 Clicks:

The loader working device should be able to guarantee: when the cylinder lock, boom cylinder lifting or landing, the bucket linkage mechanism on translational or near libration, lest the bucket and spilled material; when the movable arm at any position, the bucket arm rotate around the hinge point of unloading, the bucket tilt angle no less than 45 degrees, after unloading boom down and can make the bucket automatic flat. Structure type loader working device, there are seven main types, namely according to the number of different components of linkage mechanism, divided into three bar, four bar, five bar, six bar and eight bar; according to the steering input and output rod is the same and is divided into forward and reverse link mechanism etc.. The shape of the bucket cutter is divided into four kinds. The choice of tooth shape shall take into account the factors such as insertion resistance, wear resistance, and ease of replacement. The tooth is divided into sharp teeth and blunt teeth, wheel loaders with pointed teeth, while the crawler mounted multi boot using blunt tooth. The number of bucket teeth depends on the width of the bucket, and the distance between the teeth is usually 150-300mm. The bucket tooth structure is divided into two types: integral type and split type. The small and medium-sized loaders adopt integral type, and the large loader is often split because of poor working conditions and serious wear of bucket teeth. Split bucket teeth are divided into basic teeth 2 and tooth tip 1, two parts, wear only need to change the tip of the tooth. It's very helpful for us to work. We can improve our work efficiency if we are familiar with loaders.